Gypsum Retarder(RETARDER)

Gypsum retarder is mainly used to paint gypsum, bonded gypsum, gypsum putty, gypsum products and other production of gypsum building materials, mainly used to reduce the speed of gypsum coagulation.

 

Мәліметтер
Тегтер
Gypsum Retarder(RETARDER)

Usually white, colorless, colorless and transparent crystal is called transparent gypsum, sometimes it is gray,
light yellow,light brown and other colors due to impurities. Stripes white. Transparent. Glass luster, cleavage surface pearl luster, fibrous aggregate silk luster. The cleavage is very complete and moderate, and the cleavage pieces are split into rhomboids with an included angle of 66 and 114. Brittle. Hardness 1.5 ~ 2. There is a slight change in different directions. Relative density 2.3.

 

Product Parameters

 

Элемент

Ауқым

Raw materials

Amino acid

Modified Amino acid salt

≧40%

Calcium hydroxide

≦50%

Ылғалдылық

≦3%

Screening rate(Mesh:180-200)

≥95%

Appearance

Off White

Odor

little or no odor

Product Property

 

As one of the main building cementitious materials, gypsum plays an irreplaceable role. The hardened gypsum has good insulation and sound absorption properties. Its volume expands slightly during hardening, which can make the surface of the hardened body smooth, without cracking when drying, with good decorative properties, good processability, and low production energy consumption.

In practical applications, the gypsum material solidifies in a short time after mixing with water, and loses fluidity within a few minutes, which cannot meet the requirements of normal construction. Retarder is usually added to the stone sound system to adjust the setting time so that the gypsum slurry can maintain plasticity for a longer time.

Product Application

 

Gypsum retarder is mainly used in gypsum building materials such as painting gypsum, bonding gypsum, gypsum putty, gypsum products, etc. It is mainly used to reduce the setting speed of gypsum.

Production Process

 

A retarder for lightweight gypsum and a preparation method thereof. The retarder for lightweight gypsum comprises the following raw materials in parts by weight: 300-350 parts by weight of a protein component raw material, 50-150 parts by weight of a pure amino acid raw material, 10-30 parts by weight of a pH value regulator, 20-60 parts by weight of an organic acid, an acid tincture or an ester raw material, 0.1-0.5 parts by weight of an odor regulator, 2-8 parts by weight of a reaction catalyst and 350-650 parts by weight of water. The protein component raw material is dissolved in water, part of the pH value regulator is added, a hydrolysis reaction is carried out, the pure amino acid raw material, the organic acid, the acid tincture or the ester raw material, and the reaction catalyst are added in sequence, the pH value is adjusted to 7-8, heating is carried out for reaction, a mixture is obtained, the odor regulator is added, the mixture is cooled and stirred evenly, and the retarder for lightweight gypsum is obtained.

Packing and Storage

 

Бұл өнім полиэтилен қабатымен қапталған көп қабатты қағаз пакеттерге оралған. Таза салмағы 25 кг.
Бос сөмкелерді қайта өңдеуге немесе жағуға болады. Ашылмаған қаптаманы бірнеше жыл сақтауға болады. Ашық қаптама бұл өнімнің ылғалдылығына ауа ылғалдылығы әсер етуі мүмкін. Салқын, құрғақ жерде күн сәулесінен алыс жерде сақтаңыз. Қысым астында сақтаудан аулақ болыңыз.
Өнімді өңдеу, тасымалдау және сақтау туралы ақпаратты MSDS бөлімінен қараңыз.

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.


Хабарламаңызды осы жерге жазып, бізге жіберіңіз

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.